Sweep share, rolled construction

Sweep share, rolled construction

Machine part 808-101.310-75 is a Sweep share, rolled construction from our big online parts assortment. In our product range you will find original and non-original parts like our fitting alternatives from our won brand. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.

Specifications of the and the 808-101.310-75

The thickness of the Sweep share, rolled construction is important for the way the part fits on the machine. The Sweep share, rolled construction with part number 808-101.310-75 has a thickness of 8 millimeter. So the part from RDM Parts with number 808-101.310-75 as an alternative for the machine. The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go. The 808-101.310-75 has a working width of 310 millimeter. The radius of the flail, measured from the hearth of the hole on which the flail is mounted until the bottom, is 300 millimeter. This way it can be measured on what distance the flail should be operated. The hole spacing of Sweep share, rolled construction is measured by the distance between the mounting holes. With these mounting holes the part can be attached to the machine from Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. The hole spacing of this Sweep share, rolled construction 808-101.310-75 is 75 millimeter.