Share K31 - 6mm fitting for Doublet-Record 05000578

Share K31 - 6mm fitting for Doublet-Record 05000578

Machine part 808-101.40.005-6 is a Share K31 - 6mm fitting for Doublet-Record 05000578 from our big online parts assortment. We sell not only original parts, but also fitting alternatives. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.

Specifications of the 05000578 and the 808-101.40.005-6

In a general sense you can assume that a thicker product is better able to cope with wear and tear. The Share K31 - 6mm fitting for Doublet-Record 05000578 with part number 808-101.40.005-6 has a thickness of 6 millimeter. So the part from RDM Parts with number 808-101.40.005-6 as an alternative for the machine. The working width of a product indicates the surface a part can cultivate in one pass. The 808-101.40.005-6 has a working width of 110 millimeter. The radius of the 05000578 flail, measured from the hearth of the hole on which the flail is mounted until the bottom, is 250 millimeter. This radius shows the range in which the flail rotates so the mowing distance can be calculated. The hole spacing of Share K31 - 6mm fitting for Doublet-Record 05000578 is measured by the distance between the mounting holes. With these holes the part can be attached to the machine. The distance has to correspond with the replacement part else it won’t fit for the machine that it has to be mounted on. The hole spacing of this Share K31 - 6mm fitting for Doublet-Record 05000578 808-101.40.005-6 is 45 millimeter.

On what machines does the 808-101.40.005-6 fit?

the 808-101.40.005-6 and 05000578 fit on doublet record machinery. The 808-101.40.005-6 is fitting for these parts: Doublet-Record 05000578, and Kongskilde 101155535.