Sweep, rolled construction fitting for Howard 627713

Sweep, rolled construction fitting for Howard 627713

The Sweep, rolled construction fitting for Howard 627713 with part number 808-101.420-60 is one of the parts in the growing assortment of RDM Parts. In our product range you will find original and non-original parts like our fitting alternatives from our won brand. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.

Specifications of the 627713 and the 808-101.420-60

The thickness of Sweep, rolled construction fitting for Howard 627713 indicates something about the wear and tear of a part, but also if this will fit on your machinery. The Sweep, rolled construction fitting for Howard 627713 with part number 808-101.420-60 has a thickness of 8 millimeter. The part can be replaced with the parts from RDM Parts because it has a comparable thickness. The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go. The 808-101.420-60 has a working width of 420 millimeter. The radius of the 627713 flail, measured from the hearth of the hole on which the flail is mounted until the bottom, is 300 millimeter. This radius shows the range in which the flail rotates so the mowing distance can be calculated. The distance between the two mounting holes is also called the hole spacing. With these holes the part can be attached to the machine. To get it tightly fit, the distance between the holes on the new part and the old part should be equal. The hole spacing of the 808-101.420-60 from RDM Parts is equal to the original with number 627713 and the distance measures 60 millimeter.

On what machines does the 808-101.420-60 fit?

Comparable to the original with number 627713 the 808-101.420-60 fits for the machines of howard. Use the 808-101.420-60 as a fitting replacement for: Howard 627713.