Blade, right model fitting for Benassi RT45-401 - 6CM006

RT45-401 - 6CM006 blades for the benassi machine

benassi tillers use RT45-401 - 6CM006 tiller blades. Also RDM Parts has spare parts available for these machines, like the part that is seen above 808-BEN-29R, which is comparable with the original.

Mounting the blades

Tiller blades are fastened with a bolt. The rotation direction is also of importance when the tiller blade is mounted. In case of the 808-BEN-29R and the original counterpart, they are placed at the right side. Rotating clockwise and counter clockwise, the spinning blades ensure a good ploughing action.

Specifications of the RT45-401 - 6CM006 and the 808-BEN-29R

RDM Parts also has the 808-BEN-29R Blade, right model fitting for Benassi RT45-401 - 6CM006 with an equal length as the original. The product is thus 164 millimeter long and is a fitting replacement for your machinery. The width of the 808-BEN-29R is equal to the original. This Blade, right model fitting for Benassi RT45-401 - 6CM006 is 30 millimeter in width. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb. The Blade, right model fitting for Benassi RT45-401 - 6CM006 with part number 808-BEN-29R has a thickness of 4 millimeter. Since this is equal to the parts of RDM Parts, the 808-BEN-29R fits as an alternative for the original. The hole spacing measures the distance between the two mounting holes on the Blade, right model fitting for Benassi RT45-401 - 6CM006. With these holes the part can be attached to the machine. The distance has to correspond with the replacement part else it won’t fit for the machine that it has to be mounted on. This Blade, right model fitting for Benassi RT45-401 - 6CM006 808-BEN-29R has a hole spacing of 68 millimeter. The mounting holes of the 808-BEN-29R have a diameter of 9 millimeter. These holes are used to mount the Blade, right model fitting for Benassi RT45-401 - 6CM006 to the machine. Some of the parts have more than one mounting hole to mount it to the machine.

On what machines does the 808-BEN-29R fit?

the 808-BEN-29R and RT45-401 - 6CM006 fit on benassi machinery. The 808-BEN-29R is fitting for these parts: Hako E 0143-11, and Benassi RT45-401 - 6CM006.