Blade, right model fitting for Benassi S.300 (18-6) - 6CM010

S.300 (18-6) - 6CM010 blades for the benassi machine

benassi tillers use S.300 (18-6) - 6CM010 tiller blades. Also RDM Parts has spare parts available for these machines, like the part that is seen above 808-BEN-30R, which is comparable with the original.

Mounting the blades

The S.300 (18-6) - 6CM010 and our fitting alternative 808-BEN-30R are secured in place with a bolt. Tiller blades have a set direction to turn because of the placement of the blades edge. The 808-BEN-30R is pretty much the same as the original and is placed on the right side. Because of the alternating way the blades are placed on the machine, the ploughing is optimised.

Specifications of the S.300 (18-6) - 6CM010 and the 808-BEN-30R

The Blade, right model fitting for Benassi S.300 (18-6) - 6CM010 from benassi is just as long as the 808-BEN-30R from RDM Parts. The product is thus 205 millimeter long and is a fitting replacement for your machinery. Equal to the original parts, the part from RDM Parts fits as an alternative for the machine. The width measures 45 millimeter. The thickness of Blade, right model fitting for Benassi S.300 (18-6) - 6CM010 indicates something about the wear and tear of a part, but also if this will fit on your machinery. 6 millimeter thick is the Blade, right model fitting for Benassi S.300 (18-6) - 6CM010 from benassi with the original part number S.300 (18-6) - 6CM010. The alternative that is offered by RDM Parts with number 808-BEN-30R has an equal thickness and is thus a suitable alternative for the original. The distance between the two mounting holes is also called the hole spacing. With these mounting holes the part can be attached to the machine from benassi. Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. The hole spacing of this Blade, right model fitting for Benassi S.300 (18-6) - 6CM010 808-BEN-30R is 68 millimeter. The 808-BEN-30R and the original with are mounted with a mounting hole of 10,5 millimeter. With a bolt the part is attached through the mounting hole to the machine. For some parts there are multiple mounting holes to mount the part.

On what machines does the 808-BEN-30R fit?

Like the original with number S.300 (18-6) - 6CM010, the 808-BEN-30R Blade, right model fitting for Benassi S.300 (18-6) - 6CM010 fits on the machines of benassi. Use the 808-BEN-30R as a fitting replacement for: Hako 90-00 978/8, and Benassi S.300 (18-6) - 6CM010.