Blade, left model fitting for Goldoni 0435

0435 blades for the goldoni machine

The 0435 is a blade for a rotary tiller from goldoni. For these machines, RDM Parts has a fitting alternative in the 808-GOL-20L blades.

Mounting the blades

Tiller blades are fastened with a bolt. The rotating direction of the blade should be noticed when attaching them. The 808-GOL-20L is pretty much the same as the original and is placed on the left side. Rotating clockwise and counter clockwise, the spinning blades ensure a good ploughing action.

Specifications of the 0435 and the 808-GOL-20L

RDM Parts also has the 808-GOL-20L Blade, left model fitting for Goldoni 0435 with an equal length as the original. The length of the part is 240 millimeter and this makes it a fitting alternative for the original. The width of the 808-GOL-20L is equal to the original. The width measures 60 millimeter. In a general sense you can assume that a thicker product is better able to cope with wear and tear. The original Blade, left model fitting for Goldoni 0435 from goldoni is 6 millimeter thick. So the part from RDM Parts with number 808-GOL-20L as an alternative for the machine. The hole spacing of Blade, left model fitting for Goldoni 0435 is measured by the distance between the mounting holes. With these mounting holes the part can be attached to the machine from goldoni. Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. The hole spacing of this Blade, left model fitting for Goldoni 0435 808-GOL-20L is 99 millimeter. The 808-GOL-20L and the original with are mounted with a mounting hole of 10,5 millimeter. With a bolt the part is attached through the mounting hole to the machine. For some parts there are multiple mounting holes to mount the part.

On what machines does the 808-GOL-20L fit?

Comparable to the original with number 0435 the 808-GOL-20L fits for the machines of goldoni. The 808-GOL-20L is fitting for these parts: Pasquali 532, and Goldoni 0435.