Blade, left model fitting for Honda F300

F300 blades for the honda machine

honda tillers use F300 tiller blades. For these machines, RDM Parts has a fitting alternative in the 808-HON-12L blades.

Mounting the blades

Tiller blades are fastened with a bolt. Tiller blades have a set direction to turn because of the placement of the blades edge. In case of the 808-HON-12L and the original counterpart, they are placed at the left side. The tiller blades are mounted in an alternating way.

Specifications of the F300 and the 808-HON-12L

The Blade, left model fitting for Honda F300 from honda is just as long as the 808-HON-12L from RDM Parts. The product is thus 205 millimeter long and is a fitting replacement for your machinery. The original and the part from RDM Parts 808-HON-12L are equal in width. The width measures 40 millimeter. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb. The F300 from honda has a thickness of 4 millimeter. The part can be replaced with the parts from RDM Parts because it has a comparable thickness. The hole spacing of Blade, left model fitting for Honda F300 is measured by the distance between the mounting holes. With these holes the part can be attached to the machine. Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. The hole spacing of this Blade, left model fitting for Honda F300 808-HON-12L is 70 millimeter. The mounting holes of the 808-HON-12L have a diameter of 8,5 millimeter. These holes are used to mount the Blade, left model fitting for Honda F300 to the machine. Some parts have two or more mounting holes to fix it to the machine.

On what machines does the 808-HON-12L fit?

Like the original with number F300, the 808-HON-12L Blade, left model fitting for Honda F300 fits on the machines of honda. The 808-HON-12L is fitting for these parts: Sovema 900111006, and Honda F300.