Tine for rotary harrows, left model fitting for Howard 185505

185505 rotary harrow tines for the howard machine

RDM Parts has a fitting alternative for the 185505 from howard in the shape of the 808-RH-68-AL Tine for rotary harrows, left model fitting for Howard 185505.

Mounting rotary harrow tines

Usually a part is fixed to a machine with a bolt. Besides that it is good to note that not every tine can be mounted universally. The tines rotate either left or right way round. In case of the 185505 and our RDM Parts alternative 808-RH-68-AL, the tine is mounted on the left side.

Specifications of the 185505 and the 808-RH-68-AL

RDM Parts also has the 808-RH-68-AL Tine for rotary harrows, left model fitting for Howard 185505 with an equal length as the original. With its 320 millimeter it is a good alternative to the original. The original and the part from RDM Parts 808-RH-68-AL are equal in width. The width measures 100 millimeter. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb. The original Tine for rotary harrows, left model fitting for Howard 185505 from howard is 15 millimeter thick. Since this is equal to the parts of RDM Parts, the 808-RH-68-AL fits as an alternative for the original. The hole spacing of Tine for rotary harrows, left model fitting for Howard 185505 is measured by the distance between the mounting holes. With these holes the part can be attached to the machine. To get it tightly fit, the distance between the holes on the new part and the old part should be equal. This Tine for rotary harrows, left model fitting for Howard 185505 808-RH-68-AL has a hole spacing of 60 millimeter. This 808-RH-68-AL Tine for rotary harrows, left model fitting for Howard 185505 has a mounting hole of 16,5 millimeter. With a bolt the part is attached through the mounting hole to the machine. Some of the parts have more than one mounting hole to mount it to the machine.

On what machines does the 808-RH-68-AL fit?

Comparable to the original with number 185505 the 808-RH-68-AL fits for the machines of howard. The 808-RH-68-AL is fitting for these parts: Amazone 6574300 (Zinken mit Bolzen: 6170300), and Howard 185505.

Do you have any questions about the 185505 van howard

If you have any questions about the parts from RDM Parts, including the 808-RH-68-AL or the original with number 185505, then contact our product specialists. We like to find answers to your challenges.