Blade, right model fitting for Valpadana VMC 18

VMC 18 blades for the valpadana machine

VMC 18 tiller blades fit on the rotary tillers of valpadana. Also RDM Parts has spare parts available for these machines, like the part that is seen above 808-VAL-10R, which is comparable with the original.

Mounting the blades

The VMC 18 and our fitting alternative 808-VAL-10R are secured in place with a bolt. Tiller blades have a set direction to turn because of the placement of the blades edge. In case of the 808-VAL-10R and the original counterpart, they are placed at the right side. The tiller blades are mounted in an alternating way.

Specifications of the VMC 18 and the 808-VAL-10R

The original part for Blade, right model fitting for Valpadana VMC 18 has a comparable length as our fitting original with number 808-VAL-10R. The length of the part is 213 millimeter and this makes it a fitting alternative for the original. The width of the 808-VAL-10R is equal to the original. The parts is equal in width, 60 millimeter to be exact. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb. 6 millimeter thick is the Blade, right model fitting for Valpadana VMC 18 from valpadana with the original part number VMC 18. So the part from RDM Parts with number 808-VAL-10R as an alternative for the machine. The hole spacing of Blade, right model fitting for Valpadana VMC 18 is measured by the distance between the mounting holes. With these mounting holes the part can be attached to the machine from valpadana. The distance has to correspond with the replacement part else it won’t fit for the machine that it has to be mounted on. This Blade, right model fitting for Valpadana VMC 18 808-VAL-10R has a hole spacing of 46 millimeter. The 808-VAL-10R and the original with are mounted with a mounting hole of 10,5 millimeter. With a bolt the part is attached through the mounting hole to the machine. Some parts have two or more mounting holes to fix it to the machine.

On what machines does the 808-VAL-10R fit?

Like the original with number VMC 18, the 808-VAL-10R Blade, right model fitting for Valpadana VMC 18 fits on the machines of valpadana. The 808-VAL-10R is fitting for these parts: Dücker 992, and Valpadana VMC 18.