Fuel filters/fws
| Product number: | FF105 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 137.41 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 93.22 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |
Fleetguard fuel filter FF105
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF105 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF105 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 137,41 mm. The filter has an outer diameter of 93,22 mm.- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF105
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF105 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF105 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 137,41 mm. The filter has an outer diameter of 93,22 mm.Properties
| Product number: | FF105 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 137.41 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 93.22 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |