Fuel filters/fws
| Product number: | FF105D |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 153.01 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 92.96 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |
Fleetguard fuel filter FF105D FF105D
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF105D of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF105D fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 153,01 mm. The filter has an outer diameter of 92,96 mm.- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF105D FF105D
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF105D of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF105D fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 153,01 mm. The filter has an outer diameter of 92,96 mm.Properties
| Product number: | FF105D |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 153.01 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 92.96 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |