Fuel filters/fws
| Product number: | FF106 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 145.03 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 76.45 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FF106
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF106 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF106 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 145,03 mm. The filter has an outer diameter of 76,45 mm.- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF106
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF106 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF106 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 145,03 mm. The filter has an outer diameter of 76,45 mm.Properties
| Product number: | FF106 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 145.03 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 76.45 mm |
| Weight: | 1 kg |