fuel filter FF106A
| Product number: | FF106A |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 152.4 mm |
| Outside diameter: | 76.2 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FF106A FF106A
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FF106A of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF106A fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 152,4 mm. The filter has an outer diameter of 76,2 mm.- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF106A FF106A
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FF106A of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF106A fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 152,4 mm. The filter has an outer diameter of 76,2 mm.Properties
| Product number: | FF106A |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 152.4 mm |
| Outside diameter: | 76.2 mm |
| Weight: | 1 kg |