Fuel filters/fws
| Product number: | FF5040 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Suitable for brand: | Sabo |
|---|---|
| Product type: | Filters |
| Height: | 86.46 mm |
| Outside diameter: | 74.65 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FF5040 FF5040
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF5040 of Fleetguard. Before replacement, check the parts manual to make sure the FF5040 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 86,46 mm. The filter has an outer diameter of 74,65 mm.€13.85 * €16.76
€16.76 incl. VAT
€16.76*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Fuel filters/fws"
Fleetguard fuel filter FF5040 FF5040
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF5040 of Fleetguard. Before replacement, check the parts manual to make sure the FF5040 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 86,46 mm. The filter has an outer diameter of 74,65 mm.Properties
| Product number: | FF5040 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Suitable for brand: | Sabo |
|---|---|
| Product type: | Filters |
| Height: | 86.46 mm |
| Outside diameter: | 74.65 mm |
| Weight: | 1 kg |