Fuel filters/fws
| Product number: | FF5103 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Fiat hitachi: | 76591700 |
|---|---|
| Kubota: | 1552143160 |
Technical details
| Suitable for brand: | John Deere |
|---|---|
| Product type: | Filters |
| Filter Efficiency: | 20 |
| Height: | 88.9 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 50.04 mm |
| Type filter: | Fuel filter |
| Weight: | 1 kg |
Fleetguard fuel filter FF5103 FF5103
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter regularly with the fuel filter FF5103 of Fleetguard. Before replacement, check the parts manual to make sure the FF5103 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 88,9 mm. The filter has an outer diameter of 50,04 mm.- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF5103 FF5103
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter regularly with the fuel filter FF5103 of Fleetguard. Before replacement, check the parts manual to make sure the FF5103 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 88,9 mm. The filter has an outer diameter of 50,04 mm.Properties
| Product number: | FF5103 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Fiat hitachi: | 76591700 |
|---|---|
| Kubota: | 1552143160 |
Technical details
| Suitable for brand: | John Deere |
|---|---|
| Product type: | Filters |
| Filter Efficiency: | 20 |
| Height: | 88.9 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 50.04 mm |
| Type filter: | Fuel filter |
| Weight: | 1 kg |