Fuel filter spinon
| Product number: | FF5160 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Isuzu: | 5132400320 |
|---|---|
| Mitsubishi: | MB220900 |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Height: | 138.43 mm |
| Micron rating: | 0 micron |
| Outside diameter: | 90.42 mm |
| Thread type: | M20 X 1.5-6H INT |
| Weight: | 1 kg |
Fleetguard fuel filter FF5160
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF5160 of Fleetguard. Before replacement, check the parts manual to make sure the FF5160 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 138,43 mm. The filter has an outer diameter of 90,42 mm.€42.35 * €51.24
€51.24 incl. VAT
€51.24*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Fuel filter spinon"
Fleetguard fuel filter FF5160
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF5160 of Fleetguard. Before replacement, check the parts manual to make sure the FF5160 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 138,43 mm. The filter has an outer diameter of 90,42 mm.Properties
| Product number: | FF5160 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Isuzu: | 5132400320 |
|---|---|
| Mitsubishi: | MB220900 |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Height: | 138.43 mm |
| Micron rating: | 0 micron |
| Outside diameter: | 90.42 mm |
| Thread type: | M20 X 1.5-6H INT |
| Weight: | 1 kg |