Fuel filters/fws
| Product number: | FF5172 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Suitable for brand: | Jacobsen |
|---|---|
| Product type: | Filters |
| Height: | 106.17 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 79.5 mm |
| Thread type: | 3/4-16 UNS-2B |
| Weight: | 1 kg |
Fleetguard fuel filter FF5172
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FF5172of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF5172 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 106,17 mm. The filter has an outer diameter of 79,5 mm.€15.13 * €18.31
€18.31 incl. VAT
€18.31*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Fuel filters/fws"
Fleetguard fuel filter FF5172
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FF5172of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF5172 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 106,17 mm. The filter has an outer diameter of 79,5 mm.Properties
| Product number: | FF5172 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Suitable for brand: | Jacobsen |
|---|---|
| Product type: | Filters |
| Height: | 106.17 mm |
| Micron rating: | 20 micron |
| Outside diameter: | 79.5 mm |
| Thread type: | 3/4-16 UNS-2B |
| Weight: | 1 kg |
