Fuel filters/fws
| Product number: | FF5638 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | 125-8752 |
|---|
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Height: | 148 mm |
| Micron rating: | 10 micron |
| Outside diameter: | 80.3 mm |
| Thread type: | M22 X 1.5-6H INT |
| Weight: | 1 kg |
Fleetguard fuel filter FF5638 FF5638
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF5638 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5638 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 148 mm. The filter has an outer diameter of 80,3 mm.- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF5638 FF5638
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FF5638 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5638 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 148 mm. The filter has an outer diameter of 80,3 mm.Properties
| Product number: | FF5638 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | 125-8752 |
|---|
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Height: | 148 mm |
| Micron rating: | 10 micron |
| Outside diameter: | 80.3 mm |
| Thread type: | M22 X 1.5-6H INT |
| Weight: | 1 kg |
