Fuel separator spinon
| Product number: | FS19587 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 149 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FS19587
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS19587of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FS19587 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 149 mm.€29.23 * €35.37
€35.37 incl. VAT
€35.37*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Fuel separator spinon"
Fleetguard fuel filter FS19587
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS19587of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FS19587 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 149 mm.Properties
| Product number: | FS19587 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 149 mm |
| Weight: | 1 kg |