Fuel filters/fws
| Product number: | FS19802 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | TO98-9764 |
|---|
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Height: | 60.2 mm |
| Pressure: | 39 PSI |
| Type filter: | Fuel filter |
| Weight: | 1 kg |
Fleetguard fuel filter FS19802
Impurities that are in the fuel are filtered out with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FS19802of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FS19802 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 60,2 mm.- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS19802
Impurities that are in the fuel are filtered out with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FS19802of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FS19802 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 60,2 mm.Properties
| Product number: | FS19802 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | TO98-9764 |
|---|
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Height: | 60.2 mm |
| Pressure: | 39 PSI |
| Type filter: | Fuel filter |
| Weight: | 1 kg |