Fuel separator spinon
| Product number: | FS36253 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 195 mm |
| Outside diameter: | 93.8 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FS36253
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FS36253of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS36253 fits your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 195 mm. The filter has an outer diameter of 93,8 mm.€52.71 * €63.78
€63.78 incl. VAT
€63.78*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Fuel separator spinon"
Fleetguard fuel filter FS36253
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FS36253of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS36253 fits your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 195 mm. The filter has an outer diameter of 93,8 mm.Properties
| Product number: | FS36253 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 195 mm |
| Outside diameter: | 93.8 mm |
| Weight: | 1 kg |