Nanonet ff/fws ctrge metalnonmetal
| Product number: | FS53019 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Weight: | 1 kg |
Fleetguard fuel filter FS53019 FS53019
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FS53019 of Fleetguard. Before replacement, check the parts manual to make sure the FS53019 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 129 mm. The filter has an outer diameter of 81,2 mm.€54.05 * €65.40
€65.40 incl. VAT
€65.40*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Nanonet ff/fws ctrge metalnonmetal"
Fleetguard fuel filter FS53019 FS53019
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FS53019 of Fleetguard. Before replacement, check the parts manual to make sure the FS53019 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 129 mm. The filter has an outer diameter of 81,2 mm.Properties
| Product number: | FS53019 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Weight: | 1 kg |