Fuel filter standard size elemax
| Product number: | FS53021 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 240 mm |
| Outside diameter: | 148.1 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FS53021 FS53021
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS53021 of Fleetguard. Before replacement, check the parts manual to make sure the FS53021 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 240 mm. The filter has an outer diameter of 148,1 mm.€191.37 * €231.56
€231.56 incl. VAT
€231.56*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Fuel filter standard size elemax"
Fleetguard fuel filter FS53021 FS53021
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS53021 of Fleetguard. Before replacement, check the parts manual to make sure the FS53021 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 240 mm. The filter has an outer diameter of 148,1 mm.Properties
| Product number: | FS53021 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 240 mm |
| Outside diameter: | 148.1 mm |
| Weight: | 1 kg |