Nanonet ff/fws spinon metal/nonmet
| Product number: | FS53041NN |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Weight: | 1 kg |
Fleetguard fuel filter FS53041NN
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS53041NN of Fleetguard. Before replacement, check the parts manual to make sure the FS53041NN part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 318,5 mm. The filter has an outer diameter of 111 mm.€121.62 * €147.16
€147.16 incl. VAT
€147.16*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "Nanonet ff/fws spinon metal/nonmet"
Fleetguard fuel filter FS53041NN
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS53041NN of Fleetguard. Before replacement, check the parts manual to make sure the FS53041NN part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 318,5 mm. The filter has an outer diameter of 111 mm.Properties
| Product number: | FS53041NN |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Weight: | 1 kg |