RDM-Jacobsen-Aeroking Hollow Tine carbide tipped, Working-Ø 1/2
| Product number: | RDM-1615522H |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Jacobsen |
|---|---|
| Lengte: | 155 mm |
| Mounting diameter: | 9.53 mm = 3/8 Inch |
| Type: | Side eject tine |
| Weight: | 1 kg |
| Working depth: | 95 mm |
| Working depth: | 16 mm |
rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2
The rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 with part number RDM-1615522H is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 for Jacobsen
No machine part is the same. A check in the machine manual or parts manual of Jacobsen is a good measure to make sure the parts fit for your machine. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Before the purchase, make sure the part number in the manual and our part number closely match. If there is a close match, it will be highly likely that it is a part that fits for the machine. Having any doubts about the product, than ask for feedback from our product specialists.
rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 is fitting for these part numbers
The rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 with our part number RDM-1615522H is a fitting alternative voor one or more other (original and non original) parts. The part numbers of these parts are: 91427 1615522h.
€23.35*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2
The rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 with part number RDM-1615522H is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 for Jacobsen
No machine part is the same. A check in the machine manual or parts manual of Jacobsen is a good measure to make sure the parts fit for your machine. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Before the purchase, make sure the part number in the manual and our part number closely match. If there is a close match, it will be highly likely that it is a part that fits for the machine. Having any doubts about the product, than ask for feedback from our product specialists.
rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 is fitting for these part numbers
The rdm-jacobsen-aeroking hollow tine carbide tipped, working-ø 1/2 with our part number RDM-1615522H is a fitting alternative voor one or more other (original and non original) parts. The part numbers of these parts are: 91427 1615522h.
Properties
| Product number: | RDM-1615522H |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Jacobsen |
|---|---|
| Lengte: | 155 mm |
| Mounting diameter: | 9.53 mm = 3/8 Inch |
| Type: | Side eject tine |
| Weight: | 1 kg |
| Working depth: | 95 mm |
| Working depth: | 16 mm |