RDM-Toro Hollow Tine carbide tipped, Working-Ø 1/2
| Product number: | RDM-1914133H |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Lengte: | 145 mm |
| Mounting diameter: | 19.00 mm |
| Type: | Side eject tine |
| Weight: | 1 kg |
| Working depth: | 100 mm |
| Working depth: | 12.7 mm |
rdm-toro hollow tine carbide tipped, working-ø 1/2
Machine part RDM-1914133H is a rdm-toro hollow tine carbide tipped, working-ø 1/2 from our big online parts assortment. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
rdm-toro hollow tine carbide tipped, working-ø 1/2 for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. When doing a purchase, have a good look and compare the part number of the machine with our part number for similarities. If this is the case, the part will most likely fit for the machine. When in doubt about the fit of the part, our service team is ready to help you.
rdm-toro hollow tine carbide tipped, working-ø 1/2 is fitting for these part numbers
The rdm-toro hollow tine carbide tipped, working-ø 1/2 with number RDM-1914133H can be used as a fitting replacement for several parts. The part numbers of these parts are: 91452 1914133h.
€15.72 * €19.02
€19.02 incl. VAT
€19.02*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Product information "RDM-Toro Hollow Tine carbide tipped, Working-Ø 1/2"
rdm-toro hollow tine carbide tipped, working-ø 1/2
Machine part RDM-1914133H is a rdm-toro hollow tine carbide tipped, working-ø 1/2 from our big online parts assortment. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
rdm-toro hollow tine carbide tipped, working-ø 1/2 for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. When doing a purchase, have a good look and compare the part number of the machine with our part number for similarities. If this is the case, the part will most likely fit for the machine. When in doubt about the fit of the part, our service team is ready to help you.
rdm-toro hollow tine carbide tipped, working-ø 1/2 is fitting for these part numbers
The rdm-toro hollow tine carbide tipped, working-ø 1/2 with number RDM-1914133H can be used as a fitting replacement for several parts. The part numbers of these parts are: 91452 1914133h.
Properties
| Product number: | RDM-1914133H |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Lengte: | 145 mm |
| Mounting diameter: | 19.00 mm |
| Type: | Side eject tine |
| Weight: | 1 kg |
| Working depth: | 100 mm |
| Working depth: | 12.7 mm |