Pin-head pivot
| Product number: | RDM-65-05-127 |
|---|---|
| Manufacturer | RDM Parts |
Replaces original
| Toro: | TO65-05-127 |
|---|
Technical details
| Suitable for brand: | Hayter, Toro |
|---|---|
| Suitable for machine: | Toro LT-F3000 Flail Mower |
| Lengte: | 400 mm |
| Weight: | 2 kg |
pin-head pivot
The pin-head pivot with part number RDM-65-05-127 is one of the parts in the growing assortment of RDM Parts. In this assortment you will find non-original parts and fitting alternatives. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
pin-head pivot for Toro
No machine part is the same. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is similar it is very likely you have the right part. If you have any questions about the part ask them to our parts specialists.
pin-head pivot is fitting for these part numbers
The pin-head pivot with number RDM-65-05-127 can be used as a fitting replacement for several parts. The part numbers of these parts are: 8319 5873.
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
pin-head pivot
The pin-head pivot with part number RDM-65-05-127 is one of the parts in the growing assortment of RDM Parts. In this assortment you will find non-original parts and fitting alternatives. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
pin-head pivot for Toro
No machine part is the same. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is similar it is very likely you have the right part. If you have any questions about the part ask them to our parts specialists.
pin-head pivot is fitting for these part numbers
The pin-head pivot with number RDM-65-05-127 can be used as a fitting replacement for several parts. The part numbers of these parts are: 8319 5873.
Properties
| Product number: | RDM-65-05-127 |
|---|---|
| Manufacturer | RDM Parts |
Replaces original
| Toro: | TO65-05-127 |
|---|
Technical details
| Suitable for brand: | Hayter, Toro |
|---|---|
| Suitable for machine: | Toro LT-F3000 Flail Mower |
| Lengte: | 400 mm |
| Weight: | 2 kg |